Dot Day Bulletin Board
Celebrate creativity and courage with this Dot Day bulletin board!
Dixon Ticonderoga Materials:
- Fadeless® Paper White, 48" x 12', #P0057018 or 48" x 50', #P0057015
- Bordette® Decorative Border, 2¼" x 50', Black, #P0037304
- Creativity Street® Double-Sided Craft Paper Assortment, 12" x 18", #P0056554
- Pacon® Card Stock, 8½" x 11", White, #P101188
- Prang® Ready-to-Use Tempera Paint 12 Asst. Colors, #X21696 or Washable Ready-to-Use Tempera Paint, 12 Asst. Colors, #X10796
Other Materials:
- Stapler
- Scissors
- Double-sided Tape (optional)
- Cricut Machine (optional)
Step One
Cover bulletin board with White Fadeless® Paper. To do this, first cut enough paper to cover the board. Find the center of the paper you’ve cut. Roll in edges in and secure the bottom of the rolls with binder clips. Start securing the paper to the board by stapling at the top center. Roll the paper out to the left, stapling as you go. Roll out the remainder of the paper to the right stapling across the top. Then staple down the sides and bottom, smoothing the paper as you go along. Cut off excess paper around edges. Then attach Black Bordette® around edges.
Step Two
Next prepare bulletin board components. Cut 70-75 circles total in 6", 8" and 10" sizes out of Creativity Street® Double-Sided Craft Paper. Paint each dot with Prang® Tempera Paint. Attach dried dots to bulletin board, overlapping them as they sweep across the board and over the edges.
Step Three
Then enlarge letter templates 300% and cut from Black Pacon® Card Stock. Or if using a Cricut use our files at: bit.ly/3pSWmdN. Attach letters to the board.
Step Four
Lastly, on White Fadeless® Paper, paint or draw with a black marker a large-scale dot day character from the book, The Dot, by Peter H. Reynolds. Attach to the board.